PET vs PE Protective Film: 8 Dimensions, One Clear Answer
Wrong substrate or adhesive is the #1 cause of residue, scratches and cost overruns
Neither film is universally better — the right choice depends on your process. These 8 dimensions come from 20 years of measured data across 72 active GDY models.
| Dimension | PET Protective Film | PE Protective Film |
|---|---|---|
| Substrate | Polyester film: high clarity, high strength, dimensionally stable | Polyethylene film: soft, stretchable, conforms to curves |
| Clarity | Light transmittance ≥92%, ideal for optical and cosmetic parts | Often translucent, milky, blue or black/white; strong masking |
| Temperature | Up to 150–180°C, suits baking and high-temp processes | Typically ≤80°C; deforms at higher temperatures |
| Adhesive systems | Silicone / acrylic / PU / anti-static, from ultra-low to high tack | Mostly acrylic; also adhesive-free electrostatic cling |
| Residue risk | Silicone/PU systems leave virtually no residue on optical surfaces | Wrong grade or long high-temp lamination can leave residue |
| Typical processes | Cover glass, ITO film, polarizer, wafer UV adhesion-relief | Sheet metal, profiles, appliance shells, building panels in transit |
| Cost | Higher unit price, but saves cleaning and rework | Low unit price, ideal for large-area one-time protection |
| How to choose | Need clarity, heat resistance, zero residue → PET | Need curved surfaces, low cost, printability → PE |
The short answer
PET for electronics/optical processes; PE for metal, building and appliance transit protection. Unsure? Send us your substrate, process temperature and lamination time — we ship 3 free models to test.
Still unsure? Get 3 free models to test3 questions buyers ask most
Is PET protective film more expensive than PE?
PET has a higher unit price but resists heat and leaves no residue, saving cleaning and rework costs. For large-area one-time transit protection, PE is more economical.
Is adhesive residue always a film defect?
Usually it is a mismatch between adhesive chemistry and process conditions. High temperature or long lamination calls for silicone/PU PET systems or a different tack grade.
Should anti-static film be 10⁶ or 10⁹ ohm/sq?
It depends on device sensitivity and whether permanent ESD protection is required: 10⁶–10⁸ is conductive/dissipative, 10⁹–10¹¹ is anti-static. Share your device spec and our engineers will match a sample.
Ready to protect your products?
Send us your requirements — free samples and a tailored solution within 24 hours.
Contact our team