GDY Knowledge Hub
Protective Film Glossary: 30 Terms Every Buyer Should Know
Read COAs, spec sheets and quotations with confidence
Grouped into adhesion, substrate, optical, process and QC — mapped to the real fields on GDY product pages.
Adhesion & chemistry
- Peel adhesion (gf/25mm)
- Force to peel a 25mm strip at 180° — the first parameter to specify
- Low / medium / high tack
- Grades matched to surface energy: low for smooth glass, high for rough metal
- PSA (pressure-sensitive adhesive)
- Adhesive that bonds under light pressure without heat or solvent
- Silicone / acrylic / PU adhesive
- Silicone: heat-stable and residue-free; acrylic: widest tack range; PU: clear and anti-static
- UV adhesion-relief film
- High tack before UV, drops sharply after UV — for wafer/glass dicing
- Initial tack / holding power
- Instant grab vs long-term resistance to edge lifting
Substrate & structure
- PET polyester film
- Clear, strong, dimensionally stable; typically 25–188μm
- PE polyethylene film
- Soft and stretchable, suits curved and large surfaces
- Release liner
- Peelable carrier protecting the adhesive until lamination
- 3-layer co-extrusion
- Three formulations extruded together to balance tack and stiffness
- Single / double-sided protection
- Polarizers and optical parts ship with film on both faces
- Slitting / rewinding
- Cutting and rewinding to customer-specified width and roll length
Optical & electrical
- Light transmittance
- Share of light passing through; optical-grade PET requires ≥92%
- Haze
- Scattered-light cloudiness; optical adhesives require <1%
- Surface resistance (Ω/sq)
- ESD grade indicator, commonly 10⁶–10¹¹
- ESD
- Electrostatic discharge that damages components; must be controlled
- OCA optical adhesive
- Double-sided clear adhesive film for display full lamination
- UV block rate
- UV rejection; explosion-proof films typically require >99%
Process & defects
- Adhesive residue
- Adhesive left after peeling, usually a chemistry/temperature mismatch
- Bubbles / self-venting
- Air trapped during lamination; micro-vented films release it automatically
- Edge lifting
- Edge peels back under stress; related to holding power and thickness
- Gel / particle contamination
- Cleanliness defects; optical films require Class 1k/10k cleanrooms
- OGS secondary strengthening
- Chemical process for touch glass requiring acid/alkali-proof film
- Laser engraving / silk print / transfer
- Common cover-glass processes needing in-process protection film
QC & commercial
- COA
- Certificate of Analysis with measured adhesion, thickness and transmittance per batch
- CPK
- Process capability index; higher means less batch-to-batch variation
- ISO 9001 / 14001
- Quality and environmental management system certifications
- RoHS / REACH
- EU hazardous substances and chemical compliance
- MOQ
- Minimum order quantity; GDY samples have no MOQ
- Cleanroom class
- Class 1k / 10k define the maximum particle count per volume
Siap melindungi produk Anda?
Kirimkan kebutuhan Anda — sampel gratis dan solusi yang tepat dalam 24 jam.
Hubungi tim kami