GDY Knowledge Hub

Protective Film Glossary: 30 Terms Every Buyer Should Know

Read COAs, spec sheets and quotations with confidence

Grouped into adhesion, substrate, optical, process and QC — mapped to the real fields on GDY product pages.

Adhesion & chemistry

Peel adhesion (gf/25mm)
Force to peel a 25mm strip at 180° — the first parameter to specify
Low / medium / high tack
Grades matched to surface energy: low for smooth glass, high for rough metal
PSA (pressure-sensitive adhesive)
Adhesive that bonds under light pressure without heat or solvent
Silicone / acrylic / PU adhesive
Silicone: heat-stable and residue-free; acrylic: widest tack range; PU: clear and anti-static
UV adhesion-relief film
High tack before UV, drops sharply after UV — for wafer/glass dicing
Initial tack / holding power
Instant grab vs long-term resistance to edge lifting

Substrate & structure

PET polyester film
Clear, strong, dimensionally stable; typically 25–188μm
PE polyethylene film
Soft and stretchable, suits curved and large surfaces
Release liner
Peelable carrier protecting the adhesive until lamination
3-layer co-extrusion
Three formulations extruded together to balance tack and stiffness
Single / double-sided protection
Polarizers and optical parts ship with film on both faces
Slitting / rewinding
Cutting and rewinding to customer-specified width and roll length

Optical & electrical

Light transmittance
Share of light passing through; optical-grade PET requires ≥92%
Haze
Scattered-light cloudiness; optical adhesives require <1%
Surface resistance (Ω/sq)
ESD grade indicator, commonly 10⁶–10¹¹
ESD
Electrostatic discharge that damages components; must be controlled
OCA optical adhesive
Double-sided clear adhesive film for display full lamination
UV block rate
UV rejection; explosion-proof films typically require >99%

Process & defects

Adhesive residue
Adhesive left after peeling, usually a chemistry/temperature mismatch
Bubbles / self-venting
Air trapped during lamination; micro-vented films release it automatically
Edge lifting
Edge peels back under stress; related to holding power and thickness
Gel / particle contamination
Cleanliness defects; optical films require Class 1k/10k cleanrooms
OGS secondary strengthening
Chemical process for touch glass requiring acid/alkali-proof film
Laser engraving / silk print / transfer
Common cover-glass processes needing in-process protection film

QC & commercial

COA
Certificate of Analysis with measured adhesion, thickness and transmittance per batch
CPK
Process capability index; higher means less batch-to-batch variation
ISO 9001 / 14001
Quality and environmental management system certifications
RoHS / REACH
EU hazardous substances and chemical compliance
MOQ
Minimum order quantity; GDY samples have no MOQ
Cleanroom class
Class 1k / 10k define the maximum particle count per volume
← Back to PET vs PE comparison

Sedia untuk melindungi produk anda?

Hantar keperluan anda — sampel percuma dan penyelesaian yang sesuai dalam 24 jam.

Hubungi pasukan kami
Ada yang boleh saya bantu?