GDY Selection Guide

PET vs PE Protective Film: 8 Dimensions, One Clear Answer

Wrong substrate or adhesive is the #1 cause of residue, scratches and cost overruns

Neither film is universally better — the right choice depends on your process. These 8 dimensions come from 20 years of measured data across 72 active GDY models.

DimensionPET Protective FilmPE Protective Film
SubstratePolyester film: high clarity, high strength, dimensionally stablePolyethylene film: soft, stretchable, conforms to curves
ClarityLight transmittance ≥92%, ideal for optical and cosmetic partsOften translucent, milky, blue or black/white; strong masking
TemperatureUp to 150–180°C, suits baking and high-temp processesTypically ≤80°C; deforms at higher temperatures
Adhesive systemsSilicone / acrylic / PU / anti-static, from ultra-low to high tackMostly acrylic; also adhesive-free electrostatic cling
Residue riskSilicone/PU systems leave virtually no residue on optical surfacesWrong grade or long high-temp lamination can leave residue
Typical processesCover glass, ITO film, polarizer, wafer UV adhesion-reliefSheet metal, profiles, appliance shells, building panels in transit
CostHigher unit price, but saves cleaning and reworkLow unit price, ideal for large-area one-time protection
How to chooseNeed clarity, heat resistance, zero residue → PETNeed curved surfaces, low cost, printability → PE

The short answer

PET for electronics/optical processes; PE for metal, building and appliance transit protection. Unsure? Send us your substrate, process temperature and lamination time — we ship 3 free models to test.

Still unsure? Get 3 free models to test

3 questions buyers ask most

Is PET protective film more expensive than PE?

PET has a higher unit price but resists heat and leaves no residue, saving cleaning and rework costs. For large-area one-time transit protection, PE is more economical.

Is adhesive residue always a film defect?

Usually it is a mismatch between adhesive chemistry and process conditions. High temperature or long lamination calls for silicone/PU PET systems or a different tack grade.

Should anti-static film be 10⁶ or 10⁹ ohm/sq?

It depends on device sensitivity and whether permanent ESD protection is required: 10⁶–10⁸ is conductive/dissipative, 10⁹–10¹¹ is anti-static. Share your device spec and our engineers will match a sample.

Next: 30 protective film terms →

พร้อมปกป้องผลิตภัณฑ์ของคุณหรือยัง?

ส่งความต้องการของคุณ — รับตัวอย่างฟรีพร้อมโซลูชันที่เหมาะสมภายใน 24 ชั่วโมง

ติดต่อทีมงาน
มีอะไรให้ช่วยไหม?